52
Cleaning and Maintenance
WARNING/
AVERTISSEMENT
Glass breakage! / Bris de glace !
Cuts. / Risque de coupure.
➜ Work carefully; do not readjust the adjusting screw too much./
Travailler attentivement, ne pas serrer trop fort la vis de
ré-glage.
1. Screw the valve into the G6 center piece (2) up to the stop.
2. Turn the adjusting screw clockwise until a white ring can be seen at the shaft of the
glass.
Cleaning
All surfaces of the unit allow for cleaning with a damp cloth and if required a mild soap
lotion.
CAUTION/
ATTENTION
Attention: Damage to the surfaces / Dommages matériels dus
à l’emploi d’un produit de net-toyage corrosif !
All surfaces can be damaged by improper cleaning./
Dommages à la surface de l’appareil
In any case do not use: / Ne pas utiliser:
▪ Chlorine bleach or any cleaning agent including chlorine/
d’agent de blanchiment
▪ Ammoniac/
de l’ammoniac
▪ Abrasive cleaning agents such as cleaning rags, scrubbing agents
or any other agents which include metal components/
en aucun cas des produits abrasifs, de la laine de nettoyage ou des
nettoyants contenant des compo-sants métalliques.
➜ Wipe the surfaces of the unit with a damp cloth (mild soap solution)/
Essuyer la surface de l’appareil à l’aide d’un chiffon humide (lessive douce).
To Next Page