EasyManua.ls Logo

Heidolph Hei-VAP Precision - Disassembly and Storage; Dismantling

Heidolph Hei-VAP Precision
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
85
Disassembly and Storage
Disassembly and Storage
Dismantling
WARNING/
AVERTISSEMENT
Glass breakage! / Bris de glace !
Serious injuries from shattering and breaking glass./
Risque de blessure grave en cas de bris de glace.
Check glass devices for damages (stars, breaks, etc.)./
Contrôler que les appareils en verre ne soient pas endom-magés
(étoiles, bulles, etc.).
Only use perfect glass devices and replace all damaged
glassware as soon as possible./
Utiliser uniquement des appareils en verre en parfait état.
Work carefully./
Travailler attentivement.
CAUTION/
ATTENTION
Unintentionally rotating drive!/
Entraînement rotatif involontaire !
Injuries to hands. / Blessure des mains.
Verify that the rotation is displayed./
S’assurer de l’arrêt de la rotation.
WARNING/
AVERTISSEMENT
Risk of injuries due to retracting or entrapment!/
Risque de blessure, risque d’être attiré ou happé !
Risk of injury. / Risque de blessure.
A risk of entanglement exists on the movable parts of the unit./
Risque d’écrasement près des pièces mobiles de l’installation.
Wear suitable protective clothing for activities on the rotary
evaporator with goggles and gloves./
Porter des vêtements de protection appropriés (lunettes de
protection et gants de protection, le cas échéant) lors de l’uti-li-
sation de l’évaporateur rotatif.
WARNING/
AVERTISSEMENT
Hot media! / Supports chauds !
Burns. / Brûlures.
Do not touch the interior and the upper edge of the heating
bath, the evaporator  ask and the heating bath liquid./
Ne pas toucher l’intérieur et le bord supérieur du bain
chauf-fant, le ballon d’évaporation et le liquide du bain
chauffant.
Wear suitable heat protection gloves when changing the evapo-
rator  ask./
Pour changer le ballon d’évaporation, porter des gants calori-
fuges appropriés.
Dismantle the glassware sets in reverse sequence of the assembly.

Table of Contents