6 Electric Connection
KRONOS 20 31
6 Electric Connection
All wiring must be carried out exclusively by trained personnel and in
conformity with current norms and regulations.
The electric connection must be done in accordance with the wiring diagrams provided by
HEINZMANN and by the plant builder. Only specified cable types may be used for wiring.
All indicated cable cross-sections must be adhered to at all costs.
The control valve is controlled by a HEINZMANN control unit. In special
cases the control valve may be connected to a third party control unit of
the plant builder. In this case an express authorization by HEINZMANN
is required. The specification provided by HEINZMANN must be adhered
at all costs.
Warning
Warning
To Next Page
Loading...
Need help?
General
