14 Parameter Description
KRONOS 20 65
14 Parameter Description
14.1 Synoptical Table
In the table below the different parameter groups are listed in adjacent colums. It is fol-
lowed by another table itemizing all parameters by number and identifier and grouping
them in accordance with the previous four lists. This will make it easier to understand the
interrelations between the different parameters.
Parameters Measurements Functions Curves
No. Designation No. Designation No. Designation No. Designation
1 Number of teeth / speed 2000 Speed Pickup / Speed 6000 Misfiring
50 Speed deviation /
Misfiring
2050 Speed deviation /
Misfiring
4050 Speed deviation /
Misfiring
250 Start 2250 Start
300 Stepper Motor 2300 Stepper Motor 4300 Stepper Motor
800 Switch Functions 2800 Switch Functions /
Digital Outputs
4800 Digital Inputs
900 Sensors 2900 Sensors
1000 Error Handling 3000 Current Errors 5000 Error Handling
1400 AFR 3400 AFR 5400 AFR 7400 AFR: Lambda-Map
1500 Analogue Inputs 3500 Analogue Outputs 5500 Analogue Inputs 7500 AFR: Lambda-Map
3600 Internal Inputs 5600 Internal Inputs 7600 AFR: Gas valve curve
1700 Positioner 5700 Positioner
1800 Status 3800 Status
7900 Temperature sensor
9400 AFR: Map
Volumetric efficiency
9500 AFR: Map
Mechanical efficiency
9600 AFR: Curve
CH4-content
To Next Page
Loading...
Need help?
General
