EasyManuals Logo

Heinzmann KRONOS 20 User Manual

Heinzmann KRONOS 20
106 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #68 background imageLoading...
Page #68 background image
13 Error Handling
60 KRONOS 20
- Check manifold temperature sensor and replace if required.
- Check tolerance values for manifold temperature sensor.
3019 ErrMeasuredPower 3119 SErrMeasuredPower
Cause: - Short circuit or cable break at sensor input for measured power.
Response: - Error message: Common alarm.
- Emergency operation with substitute value or last valid sensor value
depending on choosen response mode.
- Operation mode Open-Loop for emergency operation only if the substitute value.
for measured power is lower than the switch level for Closed-Loop mode.
- Error is cleared automatically when sensor values are within tolerances,
depending on choosen response mode.
Action: - Check sensor cable for short circuit or cable break.
- Check power sensor and replace if required.
- Check tolerance values for power sensor.
3020 ErrLambda 3120 SErrLambda
Cause: - Short circuit or cable break at sensor input for lambda sensor.
Response: - Error message: Common alarm.
- Emergency operation in Open-Loop mode.
- Emergency operation with substitute value or last valid sensor value.
depending on choosen response mode.
- Error is cleared automatically when sensor values are within tolerances,
depending on choosen response mode.
Action: - Check sensor cable for short circuit or cable break.
- Check lambda sensor and replace if required.
- Check tolerance values for lambda sensor.
3021 ErrCH4Content 3121 SErrCH4Content
Cause: - Short circuit or cable break at sensor input for CH4-content.
Response: - Error message: Common alarm.
- Emergency operation with substitute value or last valid sensor value.
depending on choosen response mode.
- Error is cleared automatically when sensor values are within tolerances,
depending on choosen response mode.
Action: - Check sensor cable for short circuit or cable break.
- Check CH4-sensor and replace if required.
- Check tolerance values for CH4-sensor.
3046 ErrMisfireWarn 3146 SErrMisfireWarn
Cause: - Speed variance has exceeded the power dependent warning curve for monitoring
of misfiring.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Heinzmann KRONOS 20 and is the answer not in the manual?

Heinzmann KRONOS 20 Specifications

General IconGeneral
BrandHeinzmann
ModelKRONOS 20
CategoryControl Systems
LanguageEnglish

Related product manuals