Helmholz REX 300 - 5. Router Configuration Transfer Options; Transfer Configuration per USB Stick; Automatic Configuration via Portal; Configuration via Local LAN Connection

Quick Start Guide REX 300
8
5. Routercongurationtransferoptions
ThecreateddevicecongurationcanbetransferredtotheactualREX300unitina
varietyofways.
1.TransfercongurationperUSBstick
YousavethecongurationlelocallyonyourPCandsubsequentlytransferitwitha
USB stick to the REX 300 (see page 9, chapter 5.1).
You can choose this procedure when the REX 300 router cannot be reached either
through the local network (LAN) or through the Internet during commissioning.
Prerequisite:thecongurationPChasaconnectionwiththeportal.
2.Automaticcongurationviaportal(FirstsetupintheREX300required)
Tothispurposeyouprovidethecongurationdatafordownloadingintheportal.
ThecongurationisautomaticallytransferredtotheREX300assoonastheREX300
connects with the portal (page 11, chapter 5.2)
Prerequisite/conditions:
- theREX300cancreateaconnectionwiththeportalviatheInternet
- YouhavepreconguredtheconnectiondataviathewebinterfaceoftheREX300
(First Setup Assistant).
- TheREX300canbeauthenticatedattheportalonthebasisofitsuniqueserial
number.
3.CongurationviaLAN
ThecongurationistransferredviaalocalLANconnectionofthecomputeronwhich
shDIALUP is running (see page 18, chapter 5.3).
You can select this procedure if the REX 300 router can be reached directly through
LAN.TheIPaddresssettingsofthenetworkadapterarenotrelevant.
Note: We recommend the "Conguration per LAN" variant for the initial conguration.