Users Manual Henkovac 04-serie V2019
6.2 Operating the Machine with One-Program Control System
On: Turns the machine on
o The machine will start up in the most-recently used program
o The pump of a machine with a transparent cover will start when the cover is closed
Off: Turns the machine off
o When pressing the button once, the symbol will start blinking and the pump will
stop after about 4 seconds
o When pressing the button a second time, the pump will stop immediately
o Closing the cover will initiate the cool-down phase; the machine will complete a num-
ber of vacuum cycles before turning off automatically
Stop-function
o Stops the machine at any point in the packing cycle and aerates the chamber
Reset-function
o While programming, resets the program value to its original setting
Press the menu button to return to the Home menu
Stops the current function and initiates the next step in the cycle
o By pressing the of the sealing button , the vacuum function stops and the pro-
gram jumps to the sealing function
o While packing sauce or soup, the package may be sealed as soon as product boiling is
detected
Entering the desired vacuum time
By pressing the + or – of the vacuum button , the vacuum time can be increased or de-
creasedThe selected value is confirmed and saved by pressing the menu button
o Press the button to reset the original value
Entering the desired sealing time
o By pressing the + or – of the sealing button , the sealing time can be increased or de-
creased
The selected value is confirmed and saved by pushing the menu button
o Press the button to reset the original value
Menu Button
o Confirms and saves the entered values for vacuum and sealing times
o Returns to the Home menu
When turning off the machine with the button, the symbol will start blinking
o The pump will stop after about 4 seconds
o Press the button a second time and the
pump will stop immediately
o Close the lid; the machine initiates the cool-down
phase and perform a number of vacuum cycles before turning off automatically
o These additional cycles allow any moisture in the oil of the pump to evaporate. This in-
creases the longevity of the machine and minimizes the need for oil changes
and pump maintenance
To Next Page
Loading...
