1－
3
PDI (PRE DELIVERY INSPECTION)
(For ATV-50/90/100)
□ 1. Record the frame and engine number into the owner’s manual.
□ 2. Check that all tires have correct pressure specified on the tire or in the owner’s manual.
□ 3. Engine lubrication oil (2 stroke, Grade SAE30) tank is filled.
□ 4. Battery is installed properly.
□ 5. All brake cables are adjusted properly.
□ 6. Fuel tank has enough gasoline to operate.
□ 7. Check the suspension and drive chain for proper setup.
□ 8. Check that all electrical components and lights are working properly.
□ 9. Make sure that the owner’s manual and tool bag are installed under the seat.
If there are any other questions, please check the owner’s manual for details.
CAUTION: Before install the front rim, beware the stopper of front brake plate assembly
must fit into the front knuckle 7-mm plate.
To Next Page
