3
4
15
(1) Electric starter switch (2) i3s switch
1
3. Turn signal lamp switch ( )
Shift the turn signal lamp switch (3) sideways
for right/left indications and leave it to come
back to its normal position on its own.
IMPORTANT: To switch “OFF” the turn
signal after completing the turn, gently push
inside.
4. Horn switch ( )
Press the horn switch (4) to operate the horn.
(3) Turn signal lamp switch (4) Horn switch
Right handlebar controls
1. Electric starter switch ( )
(For electric start model)
Ensure starter switch (1) is operated when the
vehicle is in neutral gear. If the vehicle is
engaged in gear press the clutch lever before
operating the starter switch. Release starter
switch after the engine has started.
•
If electric starter switch is pressed
continuously and engine does not start,
cranking of engine will stop after 5 secs.
After that rider again needs to press the
electric starter switch.
•
If engine started, cranking of the engine will
stop after r/min reaches more than 850.
CAUTION
!!
There is an i3s switch provided to enable (2)
the rider for turning i3s mode “ON” or “OFF”
based on the traffic conditions.
2. i3s switch (For i3s model)
2
1
(1) Dimmer switch (2) Clutch switch
2
To Next Page
Loading...
