38
If proper adjustment cannot be obtained or the
clutch does not work correctly, visit your
Authorised workshop.Hero MotoCorp
NOTE
•
Check for clutch cable model. Use genuine
clutch cables.
Other checks
•
Check the clutch cable for kinks or signs of
wear that could cause sticking or failure.
•
Start the engine, press the clutch lever and
shift into gear. Make sure the engine does
not stall, and vehicle does not creep.
Gradually release the clutch lever and open
the throttle. The vehicle should start
smoothly and accelerate.
•
Check for clutch cable routing.
(1) Free play 2-6 mm:
1
Check at full left and full right steering
positions. Inspect the condition of the throttle
cable from the throttle grip down to the
THROTTLE OPERATION
Cable inspection
Check for smooth rotation of the throttle grip
from the fully open to the fully closed position.
improperly routed, it should be replaced or
rerouted. Standard throttle grip free play (1)
is approximately 2-6 mm of grip rotation.
throttle body. If the cable is k cinked, hafed or
A
B
(2) Boot (3) Lock nut (4) Adjuster
(A) Decrease free play (B) Increase free play
Free play adjustment
Slide the boot (2), loosen the lock nut (3) and
turn the adjuster (4).
2
4
3
To Next Page
Loading...
