•
Remove centrifugal filter cover (9) & clean
the centrifugal filter (10) with non
flammable or high flash point solvent
(kerosene).
33
NOTE
•
Clean filters as specified in the maintenance
schedule.
•
Ensure to replace gasket with new one once
removed.
(6) Gasket (7) Dowel pins
(8) Oil filter screen
(9) Centrifugal filter cover
•
Reinstall the dowel pins and new gasket.
•
Fill the crankcase with clean engine oil as
per specification.
•
Reinstall the centrifugal filter cover, right
crankcase cover, rider footrest, muffler, kick
starter pedal and clutch cable.
•
Adjust the clutch cable free play (page 37).
(10) Centrifugal filter
10
9
6
7
8
AIR CLEANER
Air cleaner element inspection
T element is viscous type, it he air cleaner
should be at regular intervals replaced
(page 28). Early replacement may be
required when riding in unusually wet or dusty
area.
To Next Page
Loading...
