EasyManua.ls Logo

HERO HF-DELUXE PROGRAMMED FI - Page 52

HERO HF-DELUXE PROGRAMMED FI
71 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
48
Bumps or bulges in the side of the tyre or
the tread. Replace the tyre if you find any
bumps or bulges.
Look for:
Inspection
Whenever you check the tyre pressure, you
should also examine tyre treads & side walls
for wear, damage & foreign objects:
Over inflation/Under inflation will affect the
performance.
CAUTION
!!
Front
Rear
2
1.75 kgf/cm (25 psi)
2
2.00 kgf/cm (28 psi)
2
1.75 kgf/cm (25 psi)
2
2.80 kgf/cm (41 psi)
Rider only Rider and Pillion
Make sure the valve stem caps are secure.
If necessary, install a new cap.
The recommended “cold” tyre pressure are:
Over inflated tyres make your vehicle ride
more harshly, are more prone to damage from
surface hazards and wear unevenly.
Excessive tread wear.
Cuts, splits or cracks in the tyre. Replace the
tyre if you can see fabric or cord.
Replace tyres immediately when the wear
indicator (1) appears on the tyre. The tread
limits are :
Also, if you hit a pothole or hard object, pull
to the side of the road as soon as you safely
can and carefully inspect the tyres for
damage.
Tread wear
MINIMUM TREAD DEPTH:
Front:1.0 mm Rear: 1.0 mm
Check the tread wear indicator (1) for tyre
wear.
Unidirectional tyres
Ensure the arrow mark (2) on the tyre is in
the same direction as that of forward rotation
of the wheel, whenever the tyre is removed
and put back in case of puncture.

Related product manuals