14/34
– 9 – Overtemperature
Error Overtemperature in the motor indicated.
Error
consequence
Drive switches off. No brake effective
Error cause
• Motor defective
• Power board (A1) defective
• Overtemperature switch in motor defective
• Loosen contact in plug S401 Pin 4 or 5
Measurement Remove plug S405 and measure between Pin 4 and 5 :
Switch open : ≈ 0 Ω OK
Switch closed: ∞ Ω defective
See also section 10.2.
Error code reset Perform a MAINS RESET after standstill.
– c – Controller-Watchdog
Error Watchdog in power board
Discrepancy in program procedure
Error
consequence
Drive switches off. No brake effective
Error cause
• Power board (A1) defective
Error code reset Perform a MAINS RESET after standstill.
To Next Page
Loading...
