Hettich EBA 20S - Technical Specifications; General and Performance Specifications; EMC, Safety, Dimensions, and Weight

31/34
11 Technical specification
Manufacturer
Andreas Hettich GmbH & Co. KG
D-78532 Tuttlingen
Model EBA 20S
Type 2080 2080-01
Mains voltage (± 10%) 200 - 240 V 1∼ 100 - 127 V 1∼
Mains frequency 50 - 60 Hz 50 - 60 Hz
Connected load 130 VA 180 VA
Current consumption 0.7 A 1.8 A
Max. capacity 8 x 15 ml
Allowed density
1.2 kg/dm3
Speed (RPM) 8000
Force (RCF) 6153
Kinetic energy 1450 Nm
Obligatory inspection (BGR 261) no
Ambient conditions (EN 61010-1)
− Set-up site
Indoors only
− Altitude
Up to 2000 m above sea level
− Ambient temperature
2°C to 40°C
− Humidity
Maximum relative humidity 80% for temperatures up to 31°C, linearly
decreasing to 50% relative humidity at 40°C.
− Excess-voltage category
(IEC 60364-4-443)
ΙΙ
− Pollution degree
2
Device protection class
Ι
Not suitable for use in explosion-endangered areas.
EMC
− Emitted interference (suppression of
radio interference)
EN 55011,
Group 1, Class B
EN 61000-3-2
EN 61000-3-3
FCC Class B
− Interference immunity
EN 61000-6-1 ----
Noise level (dependent on rotor)
≤ 55 dB(A)
Dimensions
− Width
231 mm
− Depth
292 mm
− Height
216 mm
Weight approx. 6.3 kg