Hexagon GLOBAL S - Page 22

22
•
GLOBAL S - User Manual
Lock/Unlock
Not used.
Jog mode
The JOG MODE control allows selecting the reference system used for the axes
movements:
 Probe: the reference system is based on the probe axes
 Part: the reference system is based on the part axes
 Mach: the reference system is based on the machine axes.
The three LEDs indicate the selected reference system.
Run/Hold
The button switches the control system between the Run and Hold states.
The LED shows the current setting:
 LED off. The control system suspends axis movement (hold).
 LED on. The control system allows axis movement (run). Default setting at control
system start-up