Overview • 27
Quadratic relation jogbox
Enables/disables the quadratic relation between joystick movement and controlled speed.
When enabled, this function modifies the joystick sensitivity to allow a more accurate positioning in low
speed movements.
When deactivated, the joystick is more reactive in high speed movements on long distances.
The user can select the required mode according to the most frequency method of use of the joystick (small
accurate movements or fast movements on long distances).
ECO mode
Enables/disables energy-saving ECO MODE. The mode allows to reduce electric energy consumption and
mechanical stress of motors and transmission parts.
When enabled, this mode automatically cuts off power to the axis motors after two minutes of inactivity of
the machine. If necessary, when axis Z supports a high load (e.g. a wrist), its motor remains on to prevent
the axis from descending.
The LEDS of the “DONE” (1) and “MOVE POINT” (2) buttons on the JogBox will blink in alternating manner
when the machine is in this mode.
Figure 12 Machine in ECO MODE condition indication on JogBox NJB
Motor power is immediately reactivated without any intervention by the operator as soon as a movement
must be performed (by means of the JogBox or part program) or to maintain the nominal position.
To Next Page
Loading...
