4G_2G DTU Products Function
http://www.iotworkshop.com - 34 -
Set / Query Boot Welcome Message
Set/Query hostname in the IOTService
Query GPRS software version(Only 4G product support)
Query Custom Software Version Number
Restore User Default Parameters, Automatically Restart
Save the Current Parameter as the User Default Parameter
Restore Factory Parameters, Automatically Restart
Set/Query Serial Port Parameters
Set/Query the Two-Frame Time Interval When the Serial Port
Receives Data.
Set/Query Modbus TCP to Modbus RTU Function
Set/Query Network Protocol Parameters, the Settings Will Take
Effect After Reset
Set/Query Communication Channel TCP Connection Status
Set/Query socket TCP timeout
Set/Query Whether Display From Which Communication Channel
the Data Comes From, and the Setting Will Take Effect After
Reset.
Set/Query the Communication Channel Number Tag Value.
Set/Query Channel Send/Receive the Number of Bytes
Set/Query Communication Channel Number Registration Package
Function
Set/Query Communication Channel Number Registration Package
Custom Data
Set/Query the Transmission Method of the Communication
Channel Number Registration Package
Set/Query Communication Channel Number Heartbeat Packet
Data
Set/query HTTP request type
Set/query HTTP url resources and version
Set/query WebSocket content.
Set/query MQTT topic content
Set/query MQTT login content
Set/query MQTT client id content
Set/Query Latitude and Longitude.
Application Firmware Upgrade Via Serial Port or Network
4G core module firmware upgrade
Network Testing Instruction Set
Query the IP Address of the Specified Domain Name
Query Whether the Address is Reachable
Query GPRS Signal Strength