45
6 - 5 Overwinding alarm
Hiab 160TM is equipped with an overwinding alarm system.
If the hook block is too near the boom tip, the alarm system
will be activated.
z Before operating the crane, turn on the overwinding alarm
switch.
z If the alarm is activated, retract the boom or lower the
hook.
z After operating the crane, turn off the overwinding alarm
switch.
(note) Do not shorten the wire length.
Please be careful when the extending boom or the
raising hook, because the alarm system can not be
activated when of the electric wire is damaged etc.
To Next Page
Loading...
