21
- Check that the locking works properly.
- Disengage the P.T.O or power supply after the work.
If you drive with the P.T.O or power supply engaged,
this will cause serious damage to the P.T.O/gearbox combination.
- Only after doing so should you drive away with the vehicle.
▲ DANGER
After use, always place the crane in the transport position!
If you can’t park the crane and lifting accessories in the transport
positions, but have to park it on the load space or over the load ;
secure the boom and the lifting accessories to prevent any movement
of
the crane and the lifting accessories.
To Next Page
Loading...
