47
8 - 2 Slewing bearing & mounting bolts
If there is some abnormal noise from the slewing system
and/or the mounting parts when operating the crane or
driving, please consult your Hiab dealer or service center.
That kind of noise could come from loosened condition of the
mounting bolts. At least, mounting bolts of slewing bearing
located inside of the column should be checked every 2
years.
8 - 3 Wire rope
1) How to fit the wire rope
Pass the end of a wire rope
into the wire socket along
the arrow mark on the
socket.
Do not forget to attach the
wedge and wire clip.
When attaching the wire
socket to the boom, make
sure that the arrow
mark on the face of the wire
socket faces outwards as shown the in drawing.
To Next Page
Loading...
