42
(note) Do not shorten the wire length.
Please be careful when the extending boom or the raising
hook, because the alarm system can not be activated when of
the electric wire is damaged etc.
6 - 5 After operation the crane (for driving)
z Retract the booms fully
z Rotate the boom at the driving position
(front or rear side. Refer the sticker on slewing cover and
column base plate)
z Retract the outrigger legs fully
z Retract the outrigger beam fully
z Lower the boom at lowest position
z Settle the hook with the safety rope on the chassis
z Operate (wind) the winch until the safe rope is tensioned
z Put manual accel lever in neutral position
z Disengage the PTO, then the pump stop running
To Next Page