Need help?Do you have a question about the HID DTC4000 and is the answer not in the manual?
General| Print Resolution | 300 dpi |
|---|---|
| Memory | 32 MB RAM |
| Power Requirements | 100-240 VAC, 50/60 Hz |
| Print Technology | Dye sublimation |
| Print Capability | Single-sided |
| Card Capacity | 100 cards |
| Card Sizes Accepted | CR-80 |
| Card Thickness Accepted | 0.229mm - 1.016mm |
| Connectivity | USB 2.0 |
| Operating System Support | Windows 7, 8, 10 |
| Maximum Print Width | 85.6 mm |
| Media Handling | Automatic card feed |
| Media Width | 54 mm |
| Media Thickness | 0.18 - 0.36 mm |
| Operating Temperature | 15° to 35° C |
| Storage Temperature | 5° to 55° C |
Details system requirements for using the Ethernet option.
Lists the primary features included with the Ethernet option.
Details initiating sessions, accessing IP, and the command reference table.
Covers web page security, login procedures, and accessing the printer's home page.
Procedures for switching between automatic (DHCP) and static IP address modes.
Guide for upgrading printer firmware via the web interface.
Instructions for upgrading printer firmware using the Workbench Utility.
To Next Page