HID DTC4000 - Specific Logging Setups

DTC1000/1000M/4000/4500 Ethernet User Guide – Installation Guide L001411
(Rev.1.1)
34
3
Select the None radio button when no log is required. (Note: This is the
default.)
4
Select Submit.
5
Login as a root User if you are so prompted. (Note: Any change of a setting
will only be accepted after you have successfully logged in.)
Setting up Email Event logging
Follow this procedure to enable logging using email notification:
Step
Procedure (Specify email logging)
1
Select the System Log link.
2
Select the link for the log name you want to view or configure (the default
choices are log1 or log2).
3
Select the Email radio button to choose email log notification.
4
Enter a valid e-mail address in the associated textbox.