DTC1000/1000M/4000/4500 Ethernet User Guide – Installation Guide L001411
(Rev.1.1)
Resetting to Default Settings
The Reboot page also allows the User to reboot the Ethernet Print Server into a default
settings mode. (Note: This simply restarts the Printer in a different state with the
settings in memory temporarily ignored.)
When the Default button is selected, the stored settings in the Printer’s memory are not
changed.
Select the Administration link.
Log in as a root User (using the password) if you are so prompted. (Note:
Any change of a setting will only be accepted after you have successfully
logged in.)
Select the Default button.
Wait for the Printer to reboot and display the home page.
To Next Page
Loading...
Need help?
General