HID DTC4000 - System Log Configuration; Log Management and Types

DTC1000/1000M/4000/4500 Ethernet User Guide – Installation Guide L001411
(Rev.1.1)
31
Using the System Log page
The System Log page displays the current system log settings and allows the User to
change the settings. (Note: These settings configure how system logging occurs. There
are two logs.)
Changing the Log Name
By default the names are log1 and log2. However, you can rename them from this page.
(Note: This also updates the link to the corresponding web page.)
Step
Procedure
1
Select the System Log link.