DTC1000/1000M/4000/4500 Ethernet User Guide – Installation Guide L001411
(Rev.1.1)
Using the Printer page
You can use the Printer page to review current information about the Printer device
settings and print jobs. Device settings include the following:
The status which displays information about the current print job.
The device which displays information about the Printer.
The fields are described below. See the next page to view the entire Printer page.
Indicates that no print job is active.
Indicates that the job is being sent to the Printer.
Indicates that the communication is being slowed by print
operations.
Indicates that the communication has been stopped by some
condition.
Indicates that the current job was canceled and is being
deleted.
Indicates it is ready to print.
Indicates that the Cover is open or the Printer is not ready to
print.
Indicates that an error is detected.
Indicates that printing is in progress.
This is a display of the current print jobs that have been sent to
the Printer. (Note: The current job that is being received by the
interface is displayed as the active job.)
Cancel a specific print job by selecting the appropriate Cancel
button, which appears when a print job is queued.
To Next Page
Loading...
