HID FARGO HDP 6600 - 3.5.8 Internal printer settings

3.5.8 Internal printer settings
Use this option for adjusting the internal printer settings. These settings have been customized for the printer at the
factory. These printer settings are HID advanced settings based on Electrically Erasable Programmable Read-Only
Memory (EEPROM).
Any changes affect the settings for the firmware.
Field Description
Name Displays the label for each setting.
Value Displays the current value for the setting.
Default Displays the factory default value for the setting.
Min Displays the minimum value available for the setting.
Max Displays the maximum value available for the setting.
Refresh Settings Click this link to refresh the values.
Edit Settings
Save Settings
This link toggles between editing and saving. Click this link to edit the settings in the Value column. When all
updates have been made, click the link again to save your updates.
To change a setting, click the Edit Settingslink. In the value column, change the numeric value in the row. When all
updates are correct, click the Save Settings link.
PLT-02931, A.4 75 November 2021
Powering
Trusted Identities
FARGO® HDP®6600 High Definition Card Printer/Encoder
User Guide