6 January 2019
Introduction PLT-01628, Rev. D.2
1.4 Prerequisites
The following prerequisites are required:
1. Install hardware components, including the following:
႑ PACS panels (if applicable)
႑ Supported Smart Card readers:
႑ pivCLASS (PIN, BIO or CAK)
႑ Veridt Multimode
႑ 12 - 24V DC UL294 Access Control/Burglary Power Supply, capable of supporting power
requirements as specified in Section 2 Specifications.
2. Protect the hardware components in the enclosure. See Section 4.3 Enclosure installation.
3. Observe the necessary regulatory information. See Section 7 Regulatory.
4. The pivCLASS Reader Services software has been installed and configured.
5. Ensure Administrators and Users are familiar with PACS operating concepts.
1.5 Glossary
Term Description
BIO
Biometrics
CAC
Department of Defense Common Access Cards
CHUID
Cardholder Unique Identifier
CIV
Commercial Identity Verification credential or PIV-C
FRAC
First Responder Authentication Credential
PAM
pivCLASS Authentication Module
PKI
Public Key Infrastructure
TPK
TWIC Private Key
TWIC
Transportation Worker Identification Credential
To Next Page
Loading...
