SSD7000 NVMe RAID AIC BootRAID Installation Guide
HighPoint Technologies, Inc
6. Insert a USB flash drive that contains the Windows driver into the motherboard USB slot and click
“Browse”. Select the driver file as shown:
Note: The driver revision shown in the screenshots may not correspond with current software
releases. Please download the latest driver from the AIC’s Software Updates page.
7. After loading the driver, return to the “Where do you want to install Windows?” interface. The
previous legacy disks will now be recognized as a RAID array:
8. Continue and complete the Windows installation procedure.
9. Boot into the Windows and disable Hibernation.
a. Enter the command to turn off hibernation.
#powercfg /h off
To Next Page
Loading...
