SSD7000 NVMe RAID AIC BootRAID Installation Guide
HighPoint Technologies, Inc
d. Execute the following command to copy the binary driver installation file to the system’s
temporary directory.
#cp -a /hptdd/hptdd /tmp/
e. Execute the following command to unmount the USB flash drive.
#umount /hptdd
f. When the USB flash drive is unmounted, please unplug the USB flash drive from the system.
g. Execute the following command to load the NVMe AIC binary driver.
#sh /tmp/hptdd/rhel-install-step1.sh
h. Press ALT+F6 to switch back to the installation screen and continue the installation.
i. Select Installation Destination and click Refresh.
j. Select the previously created RAID.
To Next Page
Loading...
