SSD7000 NVMe RAID AIC BootRAID Installation Guide
HighPoint Technologies, Inc
l. When the screen shows Install complete! Press Ctrl+ALT+F2 to the shell and type the
following command to install the NVMe AIC binary driver.
#sh /tmp/hptdd/postinst.sh
A message will be displayed that the driver has been installed successfully.
m. Press Ctrl+ALT+F5 to switch back to the installation screen and finish the installation.
5. If you want to boot from another kernel, please install the NVMe AIC open source driver after
entering the system.
a. Boot the system.
g. Enter the following command to extract the open source driver:
#tar zxvf HighPoint_NVMe_G5_Linux_Src_vx.x.xx_xx_xx_xx.tar.gz
To Next Page
Loading...
