Hikmicro Panther LRF PH35L User Manual

Handheld Thermal Monocular Camera User Manual
12
Figure 3-2 Correct Defective Pixel
3.9 Flat Field Correction
This function can correct non-uniformity of display.
Steps
1. Hold the wheel to enter the menu.
2. Rotate the wheel to select , and press the wheel to switch the FFC mode.
– Manual FFC: Rotate the wheel to select , and press the wheel to trigger calibration.
– Auto FFC: The device performs FFC automatically according to the set schedule when
switching on the camera.
– External: Cover the lens cover, rotate the wheel to select , and the press the wheel to
trigger calibration.
3. Hold the wheel to exit.
3.10 Set Picture in Picture Mode
Steps
1. In the view mode, hold the wheel to show the menu.
2. Select , and press the wheel to enable PIP mode. The details show in the upper center.
● When reticle is enabled, the PIP view is the detail of reticle.
● When reticle is not enabled, the PIP view is the detail of central part.
3. Hold the wheel to exit.

Hikmicro Panther LRF PH35L Specifications

General

Brand	Hikmicro
Model	Panther LRF PH35L
Category	Thermal cameras
Language	English