Handheld Thermal Monocular Camera User Manual
20
Chapter 7 Measure Distance
The device can detect the distance between the target and the observation position with laser.
Before You Start
When measuring the distance, keep the hand and the position steady. Otherwise, the accuracy
may be affected.
Steps
1. Hold the wheel to show the menu.
2. Rotate the wheel to select , and press the wheel to enter the laser ranging setting interface.
3. Press the wheel to enable Laser Ranging.
4. Rotate the wheel to select a laser ranging mode and press the wheel to confirm. Once and
continuous modes are selectable.
– means measuring the distance continuously, and the measurement duration can be
selected. The measurement result will be refreshed every 1 s.
– means measuring the distance once.
5. Hold the wheel to return to the live view interface.
6. Aim the cursor at the target and hold to measure the target distance.
Result
The distance measurement result is displayed at the upper right of the image.
Figure 7-1 Distance Measurement Result
To Next Page
Loading...
Need help?
General
