HikRobot ID6000 Series - 2.2 Indicator Status

ID6000 Series Smart Code Reader User Manual
4
Note
You should refer to the table above and the label attached to the power and I/O cable to wire the
device.
2.2 Indicator Status
The device is equipped with one PWR indicator, one LNK indicator, one ACT indicator, and 2
custom indicators (U1 and U2).
Here we introduce status for all indicators, and you should read it before you use the device. Refer
to Indicator Customization to get the method to set specific functions of the custom indicators.
Table 2-2 Description
Device Status
PWR Indicator
LNK Indicator
ACT Indicator
U1/U2
Device is
powered on.
Solid blue
Solid green
Slow/fast
flashing yellow
U1 is unlit, and
U2 is slow
flashing blue.
Power supply
exception.
Unlit
Network
exception.
Solid blue
Unlit
U1 is unlit, and
U2 is slow
flashing blue.
Device software
exception.
Solid blue
Solid green
Flashing yellow
U1 and U2 are
unlit.
Device exception
Solid blue
Solid green
Solid yellow
U1 and U2 are
solid blue.
Note
When the indicators are flashing slowly, its unlit interval is 1 s.