ID6000 Series Smart Code Reader User Manual
63
Chapter 8 Camera Operation
The camera operation section introduces some basic camera operations about how to start live
view, acquisition and recording, add cross line in the image, split window, view reports, etc.
Note
Connecting the device to the client software is required before camera operation.
8.1 Live View
Live view allows you to view the image in real-time.
Click in live view window to start live view, or click to stop.
Figure 8-1 Live View
8.2 Enable Acquisition
Enabling acquisition allows the device to acquire streams from the device in real-time.
Click in live view window to start acquisition, or click to stop. You can also right click the
device on the device list, and click Stop Acquisition to stop acquiring streams.
Note
Acquisition is still going on if you only stop live view.
To Next Page
Loading...
