ID6000 Series Smart Code Reader User Manual
30
The device can recognize 2D codes of both the above-mentioned two shapes.
Figure 7-10 Set 2D Algorithm Parameter
7.5 Signal Input Settings
In the signal input module, you can set the trigger related parameters. You can enable trigger
mode to let the acquisition of image data occur only when the trigger source is generated.
Note
For different models of the camera, the specific parameters may differ, and the actual device you
purchased shall prevail.
7.5.1 Set Trigger Mode
The camera has 2 types of trigger modes, including internal trigger mode and external trigger
mode.
Internal Trigger Mode
In this mode, the camera acquires images via its internal signals.
External Trigger Mode
In this mode, the camera acquires images via external signals like software signal and hardware
signal. The trigger source of external trigger mode includes Software, LineIn 0, LineIn 1, LineIn
2, Counter 0, TCP Start, UDP Start, and Serial Start.
To Next Page
Loading...
