ID6000 Series Smart Code Reader User Manual
64
Figure 8-2 Enable Acquisition
8.3 Add Cross Line
During live view, you can add a cross line on the live view image to adjust the position of the
object in the view.
Click in live view window to add cross line, and click (beside ) to open the editing
window to set cross line parameters.
Figure 8-3 Add Cross Line
8.4 Start Recording
During live view, you can record video files and capture images continuously.
Note
Enabling acquisition is required before recording.
Click in live view window to start recording, and click the icon again to stop. You can also
click (beside ), and then click to capture images of the live view continuously.
To Next Page
Loading...
