ID6000 Series Smart Code Reader User Manual
59
Figure 7-48 TCP Server
7.8.4 Serial
If select Serial as the Communication Protocols, you can enable Serial Protocol, enter
SerialBaudrate, Serial Data Bits, Serial parity, and Serial Stop Bits.
Figure 7-49 Serial
7.8.5 FTP
If select FTP as the Communication Protocols, you need to set following parameters.
Output Result Buffer
If enabled, when the FTP server is abnormal, the device will cache the images. When the FTP
server returns to normal, the device will send the cached images to the server. After this
parameter being enabled, you can set Output Result Buffer Number to determine the number
of the images that the device will cache.
You can also you can enable FTP Protocol, enter FTP Host Addr,FTP Host Port, FTP User Name,
and FTP User PWD.
To Next Page
Loading...
