HikRobot ID6000 Series - Chapter 2 Interface and Indicator; 2.1 12-Pin Interface

ID6000 Series Smart Code Reader User Manual
3
Chapter 2 Interface and Indicator
2.1 12-Pin Interface
Read the following section to get definitions of 12-pin interface.
Figure 2-1 12-Pin Interface
Table 2-1 Pin Definitions
No.
Signal
I/O Signal Source
Description
1
DC-PWR
--
Direct current power supply
positive
2
GND
--
Power supply ground
3
OPTO_OUT0
LineOut0 signal line
Opto-isolated output 0
4
OPTO_OUT1
LineOut1 signal line
Opto-isolated output 1
5
OPTO_OUT2
LineOut2 signal line
Opto-isolated output 2
6
OUT_COM
LineOut0/1/2 signal ground
Common-ended output
7
OPTO_IN0
LineIn0 signal line
Opto-isolated input 0
8
OPTO_IN1
LineIn1 signal line
Opto-isolated input 1
9
OPTO_IN2
LineIn2 signal line
Opto-isolated input 2
10
IN_COM
LineIn0/1/2 signal ground
Common-ended input
11
RS-232_R
--
RS-232 serial port input
12
RS-232_T
--
RS-232 serial port output