HikRobot ID6000 Series - 7.8.2 TCP Client

ID6000 Series Smart Code Reader User Manual
58
Figure 7-46 Smart SDK
7.8.2 TCP Client
The TCP includes TCP Server and TCP Client. If select TCP Client as the Communication Protocols,
you need to set following parameters.
Output Result Buffer
If enabled, when the TCP server is abnormal, the device will cache the images. When the server
returns to normal, the device will send the cached images to the server. After this parameter
being enabled, you can setOutput Result Buffer Number to determine the number of the
images that the device will cache.
You can also enable TCP Protocol, enter TCP Dst Addr and TCP Dst Port.
Figure 7-47 TCP Client
7.8.3 TCP Server
The TCP includes TCP Server and TCP Client. If select TCP Server as the Communication Protocols,
you can enable Tcp Server Enable, and enter Tcp Server Port.