HikRobot ID6000 Series - 7.10 Indicator Customization

ID6000 Series Smart Code Reader User Manual
62
When the event you select occurs, indicators will flash once.
Table 7-2 Description
No.
Parameters
Description
1
Off
No events.
2
Read Success
The indicators flash once when the device reads codes.
3
Who Am I
After selecting Who Am I, you can click Execute to let indicators
flash, and know which device you are operating.
4
System Running
The indicators flash once when the device system operates.
5
Be Triggered
The indicators flash once when the device receives trigger
signals.
6
LineOut 0
The indicators flash once when LineOut 0 outputs signals.
7
LineOut 1
The indicators flash once when LineOut 1 outputs signals.
8
LineOut 2
The indicators flash once when LineOut 2 outputs signals.
Figure 7-53 Set LED