HikRobot ID6000 Series - Page 28

ID6000 Series Smart Code Reader User Manual
19
You can set device parameters in device configuration area.
Figure 6-2 Device Configuration Area
Table 6-2 Description
No.
Module Name
Description
1
Device Connection
You can connect or disconnect device, modify device IP
address, view device information, etc.
2
Image Settings
You can set image parameters, light parameters, etc.
3
Algorithm Settings
You can add different barcodes, set barcode number,
etc.
4
I/O Control Settings
You can set parameters related with input and output.
5
Data Processing
You can set filter rule for output result.
6
Communication Settings
You can select different communication protocols, and
set related parameters for output result.
7
Configuration
Management
You can save and load user parameters, and restart the
device.
The device supports 3 types of modes, including Test, Normal, and Raw. You can select different
camera modes in live view window according to actual demands.