HIKVISION D Series User Manual

Video Intercom Door Station·User Manual
32
With the private SIP protocol, you should set IP address, sub mask, gateway, SIP IP,
master IP, and center IP for the door station.
Network Parameters Settings Interface (private SIP)
With the standard SIP protocol, you should set IP address, sub mask, gateway, and
center IP.
Network Parameters Settings Interface (standard SIP)
2. Edit network parameters.
1) Move the cursor to parameters to be configured.
2) Press the # key to enter or exit the editing mode.
3. Press the * key to exit the network configuration interface.
6.4.3 Change Password
Purpose:
2 kinds of password are available when using the door station: configuration password
(admin password) and card activation password.
Configuration Password: It is necessary when you want to configure parameters of the
door station, such as IP parameters, door station No., system type, and so on.
Card Activation Password: It is necessary when you want to issue cards via password.

HIKVISION D Series Specifications

General

Brand	HIKVISION
Model	D Series
Category	Intercom System
Language	English