Video Intercom Door Station·User Manual
34
2. Enter the old password, and the new password, and confirm the new one.
3) Move the cursor to parameters to be configured.
4) Press the # key to enter or exit the editing mode.
3. Press the * key to exit the password settings interface.
6.4.4 Issue Card
Purpose:
You cannot open door by swiping the card until you have issue the card.
You can issue the card both locally or remotely. For the detail information about issuing
card remotely, please refer to 8.4.2 Person Management.
2 methods of issuing card locally are available: issuing card via the main card, and
issuing card via the card activation password.
Issuing Card via Main Card: You can swipe card to issue it after swiping the main card in
advance.
Issuing Card via Password: You can swipe card to issue it after inputting the card
activation password in advance.
Press the numeric key 4 and 6 to enter the card issuing interface.
Issue Card via Main Card
Steps:
To Next Page
Loading...
Need help?
General
