HIKVISION D Series User Manual

Video Intercom Door Station·User Manual
64
4. Set the linked network parameters for the sub door station: main door station IP
address, SIP IP address, master station IP address, center IP address, center port No.,
subnet mask, and gateway address.
5. Select an online door station, enter the login password, and click the Set button.
 The default sub door station floor No. is 1.
 Up to 8 sub door stations can be added to a main door station.
 For the login password, if the sub door station has been activated, enter the
activation password here. If the sub door station is not activated, create a login
password here, and the sub door station will be activated simultaneously.
 When the device is successfully configured, it prompts the note: Configuring main
door station parameters succeeded
7.6 Batch Upgrading
In the device list area, click to enter the batch upgrading interface.
7.6.1 Add Devices for Upgrading
You should add the device to the batch upgrading tool first before upgrading the device.
There are 2 ways to add the device: adding online device, and adding by IP address/IP
segment.

HIKVISION D Series Specifications

General

Brand	HIKVISION
Model	D Series
Category	Intercom System
Language	English