HIKVISION D Series

Video Intercom Door Station·User Manual
46
Time
Steps:
1. Click Time to enter the device time settings interface.
2. Select Time Zone or Enable NTP.
 Time Zone
1) Select a time zone from the drop-down list menu.
2) Click Synchronization.
 NTP
1) Check the checkbox of Enable NTP to enable NTP.
2) Enter the server address, NTP port, and synchronization interval.
 DST
1) Check the checkbox of Enable DST to enable DST.
2) Enter the start time and end time of DST, and set the DST bias.
3. Click Save to save and realize the time settings.
 The default port No. is 123.