User Manual of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
If you choose the Ad-hoc mode, you don’t need to connect the wireless camera
via a router. The scenario is the same as you connect the camera and the PC directly
with a network cable.
Steps:
1. Choose Ad-hoc mode.
Figure 4-3 Wi-Fi Setting- Ad-hoc
2. Customize a SSID for the camera.
3. Choose the Security Mode of the wireless connection.
Figure 4-4
Figure 4-5 Security Mode- Ad-hoc Mode
4. Enable the wireless connection function for your PC.
5. On the PC side, search the network and you can see the SSID of the
camera listed.
Figure 4-6 Ad-hoc Connection Point
6. Choose the SSID and connect.
Security Mode Description:
To Next Page
Loading...
