User Manual of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
(2) Check the checkbox of Enable Motion Detection.
Figure 6-24 Enable Motion Detection
(3) Click . Click and drag the mouse on the live video image to draw a
motion detection area.
Note: You can draw up to 8 motion detection areas on the same image.
(4) Click to finish drawing.
Note: You can click to clear all of the areas.
(5) (Optional) Move the slider to set the
sensitivity of the detection.
2. Set the Arming Schedule for Motion Detection.
Steps:
To Next Page
Loading...
