Note: DS-2CD8464F-EI(Z)(W) camera supports wireless audible and visual alarm as
the wireless alarm output for the wireless alarm. Check the check box of Wireless
audible and visual alarm to activate the alarm output.
Figure 6-39 Wireless Alarm Output
(5) Click to save the settings.
Configure the PIR Alarm
Steps:
(1) In the Other Alarm configuration interface, check the checkbox of Enable PIR
Alarm to activate the PIR alarm and define the alarm name in the Alarm Name
field.
Figure 6-40 PIR Alarm Settings
(2) Check the checkbox to select the linkage method taken for the PIR alarm. Audible
warning, notify surveillance center, send email, upload to FTP, trigger channel,
trigger alarm output and trigger wireless alarm output are selectable. Please
refer to Step 3 Set the Alarm Actions for Motion Detection in Section 6.6.1.
Note: DS-2CD8464F-EI camera supports wireless audible and visual alarm as the
wireless alarm output for the PIR alarm. Check the check box of Wireless audible
and visual alarm to activate the alarm output.
Figure 6-41 Wireless Alarm Output
(3) Click to save the settings.
Note: The wireless alarm/PIR alarm triggered record will be started if the wireless
alarm or PIR alarm is triggered on the defined recording schedule, either when the
wireless/PIR alarm is enabled or not. Please refer to Section 7.2 for details about
configuring recording schedule.
To Next Page
Loading...
Need help?
General
