User Manual of Network Fisheye Camera
27
Figure 5-3 Time Sync by NTP Server
Note: If the camera is connected to a public network, you should use a NTP server
that has a time synchronization function, such as the server at the National Time
Center (IP Address: 210.72.145.44). If the camera is set in a customized network,
NTP software can be used to establish a NTP server for time synchronization.
Synchronizing Time Synchronization Manually
Enable the Manual Time Sync function and then click to set the system time
from the pop-up calendar.
Note: You can also check the Sync with computer time checkbox to synchronize the
time of the camera with that of your computer.
Figure 5-4 Time Sync Manually
Click the DST tab page to enable the DST function and Set the date of the DST
period.
Figure 5-5 DST Settings
2. Click Save to save the settings.
To Next Page
Loading...
